AT-ST Walker

Инструкция по сборке

A body is assembled. A-11 is separated and it pastes up from the reverse-side side of A-4 and A-5. A-7 is folded in two and stuck. A-8 is stuck on the surface and A-9 is stuck on the back. A hinge is bent and it sticks on A-1.
Front part laser gun. An about 3mm tube is used for rounding a gun barrel. Gun barrel parts are rounded using thin things, such as piano wire, a precision driver, and a thin code. Rightd side Left side Although a hole is made in B-15, an edge left for applying paste is too large at the mistake of a drawing. Please adjust.
A hip joint part consists of three parts. It will become such if three are united. The support B-7 made to unite with a body pastes by carrying out a knot ahead. A body can be rotated if B-6 by the side of a body is inserted. assembly [ of a leg ] A
Pasting fixation of the leg of the left figure is carried out at the parts of the above figure. Although the parts of "assembly [ of a leg ] A" are attached to this, please attach adjusting so that autonomy may be carried out. What is carried out before and after perpendicular is the standard which carries out autonomy.

Фотографии

JPG 51K JPG 47K JPG 42K

Скачать

PDF K PDF K PDF K
PDF K PDF K  
Примечание. Выкройки открываются в новом окне.
При распечатке самостоятельно отследите одинаковый масштаб для всех листов.

Источник: http://www.linkclub.or.jp/~shun-pop/gallery3/at-st/gallery3-4.html